Mixing and Extrusion Technology for Polymer Blends and Alloys

Home » Technology » New Technologies » Polymer, Plastics and Rubber » Mixing and Extrusion Technology for Polymer Blends and Alloys

Introduction

The development of blending technology has proven to be an extremely interesting and relatively low cost method to obtain tailored polymer blends and alloys with more flexible properties than existing polymer. Mixing is precursive to successful polymer blend formation and compatiblization. The single screw extenders and other continuous mixers are mainly used for compounding. The structural and morphological features of polymer blends and alloys are the result of complex interaction between the physical properties of the components and the mixing process. The morphology developed in the blend has a major influence on the mechanical properties. In order to provide reliable quantitative measures for predicting the morphology of the blends and alloys and to optimize processing conditions following study has been carried out: Extruder screw design for mixing improvement Determination of mixing performance in an extruder by using the designed experimentation technique


Special Features

In order to provide reliable quantitative measures for predicting the morphology of the blends and alloys and to optimize processing conditions following study has been carried out: 1. Extruder screw design for mixing improvement 2. Determination of mixing performance in an extruder by using the designed experimentation technique.


Status of Development

The development has been carried out with the production of 250 grms. per batch of environmentally degradable product. Batch time is approximately 5 hours.


Prospective Users

Manufacturers of polymer blends and alloys, master batch and compound extruder screws and mixing equipment


Type of Technology

Process


Developed by

Prof. Ashok Misra


Department

Center for Polymer Science and Engineering


For further information please contact

Managing Director
Foundation for Innovation and Technology Transfer (FITT)
Indian Institute of Technology, Delhi
Hauz Khas, New Delhi-110016, INDIA
Tel : 91-011-26597167, 26857762, 26581013, 26597153
Fax : 91-011-26851169
E-mail : drkdpn@gmail.com