UTMAST
(UT Matrix Acidizing Simulation Tool)
Description
The program can be used to create a damage assessment model
prior to applying the acidizing process in the well to reduce
risk of damage to the well.
UTMAST has two main parts, the formation
damage assessment and acidizing simulation. The formation
damage assessment model collects the necessary information
about the well system and possible damage existing in the
system from the user, and then suggests a treatment strategy
to remove the damage. The suggestions include types and volumes
of acids that should be used in the treatment in a preflush
stage, if necessary, in a main acid stage, and in a post-flush
stage. Recommendations are also made about additives and diversion.
An input file to run the simulator, UTACID, is then generated
from the assessment result. In the acidizing simulation part,
the primary simulation starts from the suggestions by the
assessment model. Permeability and skin factor are simulated
as functions of injected acid volume. Acid types and volumes
in each stage can be modified based on the simulation result
to reach the goal of maximum removal of the damage and recovering
the productivity of the well. The assessment result is summarized
in a text file, and can be viewed by Notepad, WordPad, or
other text programs. The simulation results are displayed
graphically and in the tables.
Benefits
- By optimizing the acidizing process, users can minimize
the risk of damaging the well during acidification.
Features
- The software combines an advisor section, which assists
the user in designing a treatment, with an acidizing model
that predicts the outcome of the designed treatment and
guides the user through an assessment of the formation damage
existing in a well; simulates the sandstone acidizing process,
predicting the well response to HF/HCl acid mixtures; has
a user-friendly Windows interface, and; can be used to design
sandstone acidizing treatments or simulate past treatments.
Market Potential/Applications
The software has applications in the oil
and gas industry for downstream uses.
Contact:
University of Texas,
Austin, USA
Website : www.otc.utexas.edu

|