|
Production of Fully Standardised Eco-friendly
Natural Dyes
Introduction
The technology for fully standardized natural dyes is being
developed under a major at Alps Industries, Saibabad, with
support from TIFAC. Natural dyes are variable and it is difficult
to reproduce exact shades as there is great variation in naturally
available materials. This has lead to poor usage of
natural dyes. The present project is to overcome this
limitation by perfecting the technology for fully standardized
natural dyes.
Present / Existing Technology
At present most of the natural dyes are produced in situ
i.e., the coloring matter is extracted form the raw
material just before the use. This approach has many drawbacks.
One of them being non-reproducibility of results, the other
being the handling of a large biomass produced as a
result of the extraction of the coloring matter from the raw
material. Storage stability of the extracted colorant is also
limited and requires large storage area. The dyeing with the
colorant produced in situ are not standardisedand hence non
reproducible
Approach adopted in new technology to evade technological
gap in the existing one.
In the proposed technology the Natural dyes are produced
in the powder for m. The preparation of dyes in the powder
from is free from the above mentioned drawbacks and has many
advantages. The powders besides being stable over a
long period of time are easy to handle and store. The shades
can be easily standardised and reproduced . The batch to batch
variations can be minimized by reproducing large batches or
by blending and homogenizing many small batches.
Advantages of New Technology :
Some of the major advantages of the proposed technology
are:
|
Production of Natural dyes in standardised powder form
|
|
Standardisation by centralised bulk production and
for blending
|
|
Easy of Storage , transport and handling
|
|
Easy to use and express the results in the conventional
percent basis
|
Salient Features
- Analysis of the raw materials as per the specifications
Grinding of the raw material to the required mesh size.
- Extraction of the colorant from the raw material att specified
pH and tempereature for the required time period.
- Decantation , Centrifugation and /or filteration of the
extract Concentration at low temperature under vaccum and
/or drying Alternatively spray-drying of the concentrate
Grinding to the required partcle size.
- Formulation and Packing
Applications for Ec-friendly Natural
Dyes
Natural dyes produced by the proposed technology and processes
can be used for:
- Dyeing of textile substrates such as fibres, yarns, fabrics
and garments, etc.
- Selected shades can be produced on cotton, silk, wool,
jute, coir, rayons, nylon, polyester, and their blends.
- Coloration of Paper
- Coloration of Wooden toys
- Coloration of cane products
- Coloration of Walls, wooden doors and furniture
- Coloration of Wax ,Candles etc.
- Coloration of Soap and other cosmetics
- Tattooing of skin
- Coloration of Doll's hair
- Tints for human hair
Extent of Commercialisation
|
Domestic : Approx 1000 tonnes per annum
|
|
International : Approx. 25,000 tonnes per annum
|
For further information contact:
Mr. K.K. Agrawal
Chairman & Managing Director
ALPS Industries Limited
57/2, Site IV, Industrial Area,
Sahibabad, Ghaziabad (U.P.)-201010, India
Ph: +91-(0)575-4772565-/68,
Fax: +91-(0)575-4770426/4772810
E-Mail: alpsind@del2.vsnl.net.in
Mr. Sajid Mubashir
Home Grown Technology , TIFAC
Ph: (91)-011-6965145
Fax: (91)-011-6865475
E-mail: homegrown@tifac.org.in

|