Natural water is often contaminated with
a number of bacteria, algae, protozoa, worms and other organisms
which can cause various diseases like cholera, amoebiosis,
ziardiasis, gastro-enteritis, hepatitis etc. Effective utilization
of water treatment practices have contributed to a significant
reduction of these diseases and, therefore, a simple and convenient
method for disinfection of drinking water has become a necessity
today. Conventional methods of water treatment such as storage,
coagulation, sedimentation and filtration, though this reduce
the bacterial level to an extent, are not sufficient to make
the water safe. Boiling of water is an age old process for
the killing of living micro - organisms in water but and the
process consumes scarce fuel, and is not convenient for mass
scale water treatment . Modern methods for disinfecting water
include use of chemicals, like chlorine and its compounds,
bromine, iodine, potassium permanganate, ozone and physical
methods like application of ultraviolet rays, ultrasonic waves,
membrane filtration, etc.
Out of the various methods, the use of chlorine
is found to be very convenient and cost effective. Chlorine
can be added to water for disinfection by means of bleaching
powder , chlorine tablets and chlorine liquids. But, chlorine
tablets have been found to be the most convenient and cost
effective method and therefore are well accepted by people,
both in urban and rural area.
Rural and semi-urban people drink water
from ponds, rivers or open wells which are very susceptible
to bacterial contamination. The source of water in urban areas
is also often contaminated with municipal or industrial waste
and effluents. Poor sanitation and sewage disposal in many
places also cause public health hazards. The demand for chlorine
tablets for disinfection of water is, therefore, increasing
day by day.
Process
Powered raw materials are weighed and mixed
in specified proportions. The mixed powder is fed to a tabletting
machine. The measured quantity of these tablets is filled
in a plastic bag and sealed to make it air tight. These bags
are then put in bottles. The bottles are then sealed, labeled
and packed.
Plant Parameters
Capacity,
TPA
40
No.of Shifts / day
2
Working days / Yr
300
Total Land Area, m2
400
Covered Area, m2
175
Manpower
Managerial
1
Chemist
1
Skilled (ITI)
3
Unskilled
5
Raw Material
(Tonne per Tonne
of Product)
Stable bleaching powder
0.35
Sodium chloride
0.63
Calcium carbonate
0.07
Sodium carbonate
0.07
Utilities
(Per Tonne
of Product)
Power, KwH
320
Process Water, KL
6.95
Raw Water,KL
11.6
Plant & Machinery
Tray Drier
Dies
Mass mixer
Punches
Tabletting machine
Lab equipments
Cap sealing m/c
Weighing m/c
For further information
please contact :
National Research Development Corporation
( A Government of India Enterprise )
20-22, Zamroodhpur Community Center
Kailash Colony Extension
New Delhi 110 048. India
Tel: 91-11-26419904, 26417821, 26480767, 26432627
Fax: 011-26231877, 26460506, 26478010
Website: www.nrdcindia.com