Electronics & Communication
Technologies -Polyester Film Capacitor Making Plant
Introduction
A capacitor is an electric circuit element that basically
consists of two conductors separated by a nonconductor.
The capacitor is as important as resistor and inductor
in modern electrical and electronics equipment, particularly
in radio, telephone and television equipment. For example,
a typical television set has approximately 100 capacitors.
Capacitors are widely used because they can store electrical
energy in a circuit. Also, they are an essential element
in a tuned circuit.
Areas of Application
Capacitor come in many types, such as ceramic capacitor,
the paper capacitor, the plastic film capacitor, the
metal silicon dioxide silicon capacitor and the metallized
film capacitor. Each type has its advantages depending
on its application. Polyester film capacitors have metal
plates and a dielectric film made of polyester which
are designed primarily for use in coupling, decoupling
and filters for electronic circuits of low voltage.
The capacitors can be used for power factor correction
in electric power systems and for energy storage with
subsequent rapid capacitor discharge in industrial electronics
application.
Production capacity: The plant equipped with the machinery
and equipment outlined in this proposal, is capable
of produce 3,000,000 pcs of Inductive capacitor per
month (based on 1 eight hour shifts per day, 25 days
per month), 6,000,000 pcs per month (ba
Transfer Forms:
Know-how, Training
Main Application:
Electrical/Electronics/Telecommunications
For further
information please contact :
Taiwan Plant Consultant Center (TPCC)
Director
5 Floor 110, HWAI NING St.Taipei,
Taiwan,
R.O.C.886-2
Tel: 3831832
