Electronics
& Communication Technologies
- Flame Fusion Technology for The Fabrication of
Fused Biconical Tapered (FBT) Single Mode Fibre
Components
Introduction
Flame fusion technology for the fabrication of fused
bicoxical tapered (FBT) single-mode fibre coupler components
Salient features:
PC-controlled, motorised fabrication rig for good repeatability
with regard to excess loss and splitting ratio. Typical
excess loss ~ 0.2 dB @ 1300 and 1550 nm wavelengths,
splitting ratio in the range 20% to 80%. Couplers with
any splitting ratio (in the above range) can be fabricated
for operation at any desired wavelength.
Prospective Users: Fibre
optic industries and component manufacturers.
Status of IPR Protection:
The software is copyrighted
Glossary: FBT fibre couplers;
Fibre components; Power splitters/combiners; WDM; Taps
Developed by : Prof. K
A Ghatak Department: Physics
Contact:
Managing Director
Foundation for Innovation and Technology Transfer (FITT)
Indian Institute of Technology, Delhi
Hauz Khas, New Delhi-110016, INDIA
Tel : 91-011-26597167, 26857762, 26581013, 26597153
Fax : 91-011-26851169
E-mail : drkdpn@gmail.com
